MegaTronics
International Corp. (HUB,WO/F)
VID # 1-74-273-9552-400
Vendor
Contact Information
|
CISV
Contact Information
Contact Person: Kay Turner
Phone: 210-804-1007 or 800-684-MEGA (4316)
Fax #: 210-804-1020
E-Mail: megatrak@megatrak.com
|
CMBL Address (if different):
P.O. Box 460584
San Antonio, TX 78246
Phone #: 210-804-1007
Fax #: 210-804-1020
|
CISV Ordering Address:
2544
E. Bitters Road San Antonio, Texas, 78217
MegaTrak,
ACCOMM are Registeblack Trade names of
MegaTronics International Corp. Patent
Pending for ACCOMM, Micro Control Unit (MCU),
Transfer Key Methodology. © Copyright
MegaTronics International Corp. 1995-2005.
All Rights Reserved. MegaTrak has been issued
U.S. Patent No. 6,128,551. MegaTrak is third
party tested and approved under UL 1238. ©
Copyright MegaTronics International Corp.
1994-2005. All Rights Reserved.
This is a true and accurate copy of the
catalogue approved with the Texas Building and
Procurement Commission.
Effective Date Of catalogue:
June 1, 2007
Attention State Agencies
and Co-Op Members: This CISV shall not offer
or sell the following telecommunications services
directly to the state agencies. If this vendor
attempts to sell or sells these services without
the agency receiving a waiver from the
Telecommunications Division of the TBPC, it is
the responsibility of agency to contact the
Central Procurement Division of TBPC of the
infraction. If a vendor is found to be in
violation of this policy, action will be taken
for, but not limited to, removal of their CISV
status for a period defined by TBPC
|
Product/Services Information
| Class/Items
Available |
Description |
| Class - 204 |
COMPUTER
HARDWARE AND PERIPHERALS FOR MICROCOMPUTERS |
| 19 |
Communication
Boards: Fax, Modem (Internal), Etc. |
| 20 |
Communication
Control Units: Concentrators, Multiplexors,
Couplers, Etc. |
| 24 |
Controllers,
Programmable: Industrial Control Devices, Robots,
Etc. |
| 53 |
Microcomputers,
Desktop Or Towerbased |
| 55 |
Microcomputers,
Multi-Processor |
| 58 |
Modems,
External, Data Communications |
| 60 |
Monitors,
Color And Monochrome (CGA, VGA, SVGA) Flat Panels |
| 62 |
Motherboards |
| Class - 206 |
COMPUTERS
HARDWARE AND PERIPHERALS FOR MINI AND MAIN FRAME
COMPUTERS |
| 20 |
Communication
Boards: Fax, Modem (Internal), Network Cards,
Etc. |
| 21 |
Communication
Control Units: Concentrators, Multiplexors,
Couplers, Etc. |
| 23 |
Communications
Processors And Protocol Convertors: Front-End
Processor, Network Interface Module, Protocol
Interchange, Switching Controls |
| 28 |
Computer
Systems, Process Control |
| 55 |
Integrated
Hardware-Software IT Solution (Mini/Mainframe) |
| 57 |
Keyboards |
| 59 |
Modems,
External Data Communications |
| 61 |
Monitors,
Color and Monochrome (CGA, VGA, SVGA, etc.) |
| Class - 207 |
COMPUTER
ACCESSORIES AND SUPPLIES |
| 10 |
Batteries,
Computer and Peripheral |
| 14 |
Battery
Chargers, Computer and Peripheral |
| 20 |
Braces:
Monitor, PC’s, CRT’s, Desk Top
Printers, etc. |
| 32 |
Computer
Instructional Aids And Training Devices |
| 67 |
Power
Supplies: Surge Protectors, Uninterruptible Power
Supplies, Switches, etc. |
| 72 |
Printer
Accessories And Supplies: Chemicals, Forms
Tractors, Inks And Cartridges, Paper, Label
Sheets, Sheet Feeders, Toner Cartridges |
| Class - 208 |
COMPUTER
SOFTWARE FOR MICROCOMPUTERS (PREPROGRAMMED) |
| 10 |
Accounting/Financial:
Bookkeeping, Billing And Invoicing, Budgeting,
Payroll, Taxes, Etc. |
| 27 |
Communications:
Networking, Linking, Etc. (Includes Clustering
Software) |
| 37 |
Database
Software |
| 53 |
Integrated
Software |
| 55 |
Inventory
Management |
| 65 |
Point Of
Sale Software |
| 66 |
Professional:
Computer Training, Hospital/Pharmacy, Legal, Etc. |
| 68 |
Project
Management |
| 72 |
Purchasing
And Accounting Codes For Use With Pc Software |
| 90 |
Utilities:
Back-Up, Batch File, Firewall, Menus, Operating
System, Networking Operating System, Network
Management, Recovery, Screen, Security |
| Class - 209 |
COMPUTER
SOFTWARE FOR MINI AND MAINFRAME COMPUTERS
(PREPROGRAMMED) |
| 11 |
Accounting/Financial:
Bookkeeping, Billing And Invoicing, Budgeting,
Payroll, Taxes, Etc. |
| 28 |
Communications:
Networking, Linking, Etc. |
| 38 |
Database |
| 56 |
Inventory
Management |
| 66 |
Point Of
Sale Software |
| 73 |
Purchasing
And Accounting Codes For Use With Mini/Mainframe
Software |
| 91 |
Utilities:
Back-Up, Batch File, Menus, Network Management,
Operating System, Recovery, Screen, Security,
Virus Protection, Etc. |
Class - 220
|
CONTROLLING, INDICATING, MEASURING, MONITORING, AND RECORDING
INSTRUMENTS AND SUPPLIES
|
34
|
Logging Devices, Electronic (Long-Range Data Collection and Recording for Use at a Remote Location)
|
| Class - 720 |
PUMPING
EQUIPMENT AND ACCESSORIES |
| 20 |
Control
Devices For Motor Fuel
Dispensing/Security/Management |
| Class - 918 |
CONSULTING
SERVICES |
| 28 |
Computer
Hardware Consulting |
| 29 |
Computer
Software Consulting |
| 46 |
Feasibility
Studies |
| Class - 920 |
DATA
PROCESSING, COMPUTER, PROGRAMMING, AND SOFTWARE
SERVICES |
| 4 |
Applications
Software (For Main Frame Systems) |
| 14 |
Applications
Software (For Minicomputer Systems) |
| 29 |
Facilities
Management Services, Computer |
| 31 |
Installation
of Computers, Peripherals, and Related Equipment
(Including Software) |
| 32 |
Intelligent
Transportation System Software (To include
Design, Development, and Maintenance Services) |
| 35 |
Modification
of Existing Equipment (Including Cost of Parts) |
| 37 |
Networking
Services (Including Installation, Security, and
Maintenance) |
| 40 |
Programming
Services, Computer |
| 45 |
Software
Maintenance/Support |
| 46 |
Software
Updating Services |
| 47 |
Support
Services, Computer (Includes Computer Warranties) |
| 91 |
Training,
Computer Based (Software Supported) |
| Class - 984 |
RENTAL OR
LEASE SERVICES OF COMPUTERS, DATA PROCESSING, AND
WORD PROCESSING EQUIPMENT |
| 23 |
Computers,
Micro, Rental or Lease |
Catalog of
Products/Services
Maintenance,
Repair and Support Plan
MegaTronics
International Corp. is concerned with you, the customer
and will meet your needs in product support and service.
If you have questions concerning the operation of the
equipment you purchased from our company, please contact
our Technical services Line at 800-684-4316, and request
DeAnna Keesee. Our hours of operation are Monday through
Friday, 8:00 a.m. to 5:00 p.m. CST. NOTE: If the product
you purchased is under warranty and need servicing,
contact us at 800-684-4316 and we will take care of you.
Also, we offer an extended maintenance contract that can
be purchased each year. Price depends on amount and type
of equipment.
Statement of
Guarantee
MegaTronics
International Corp. will make available equivalent
replacement parts for a product sold to the state for at
least 3 years after a product is discontinued.
| Service
Description |
Class-item |
List
Price |
St.
Disc. Price |
| Automated
Tank Gauging Equipment |
958-50 |
$4995.00 |
No disc. |
| ATG
Software Module |
958-50 |
$395.00 |
No disc. |
| LPG
Software Module |
958-50 |
$600.00 |
No disc. |
| Computer -
Software Consulting Services |
918-28
918-29 |
$90.00/hr.
$90.00/hr |
$65.00/hr.
$65.00/hr. |
| Maintenance
for System |
958-50
920-45 |
$85.00/hr.
$85.00/hr. |
$65.00/hr.
$65.00/hr. |
| Manufacturer |
Stock/SKU
# |
Class -
item |
Product/Service
Description |
List
Price |
St.
Disc. Price |
| MegaTronics
International Corp. |
2000 |
920-29
920-45 208-10 208-55 209-11 209-38 209-56 |
Preventive
Maintenance Module (proprietary) DOS MT
Automated fuel management/accounting package
(proprietary) DOS
|
$1995.00
$1995.00 $1995.00 $1895.00 $1895.00 $1895.00
$1895.00 |
2% disc. |
| MegaTronics
International Corp. |
2001 |
206-55 |
Parts
Inventory Module (proprietary) DOS |
$495.00 |
2% disc. |
| MegaTronics
International Corp. |
2003 |
920-29
920-45 208-10 208-55 209-11 209-38 209-56 |
MT Pro
Automated fuel management/accounting package
Standard Windows Software w/Preventive
Maintenance Module (proprietary)
|
$2995.00
$2995.00 $2995.00 $2995.00 $2995.00 $2995.00
$2995.00 |
2% disc. |
| MegaTronics
International Corp. |
2004 |
206-55 |
MT Pro
Deluxe Windows Software to include Parts
Inventory Module (proprietary) |
$3995.00 |
2% disc. |
| MegaTronics
International Corp. |
2010 |
207-67
207-14 |
AC
Communications Module |
$695.00
$695.00 |
2% disc. |
| MegaTronics
International Corp. |
2020 |
207-10
207-14 |
Key Drive |
$495.00
$495.00 |
2% disc. |
| MegaTronics
International Corp. |
2040 |
204-60 |
MTI
Industrial Controller |
$1595.00 |
2% disc. |
| MegaTronics
International Corp. |
2040 |
204-60 |
MTI Host
Controller |
$1395.00 |
2% disc. |
| MegaTronics
International Corp. |
2040 |
204-55
204-60 |
MTI Remote
Controller |
$1195.00
$1195.00 |
2% disc. |
| MegaTronics
International Corp. |
2041 |
204-55
204-60 |
IGC Remote
Controller |
$1395.00
$1395.00 |
2% disc. |
| MegaTronics
International Corp. |
2070 |
720-20 |
Spare Parts
MCU Module |
$1295.00 |
2% disc. |
| MegaTronics
International Corp. |
2100 |
720-20 |
1K Fueling
Key |
$7.00 |
2% disc. |
| MegaTronics
International Corp. |
2101 |
720-20 |
1K Key
Custom Colors |
$9.00 |
2% disc. |
| MegaTronics
International Corp. |
2120 |
720-20 |
16K Key (44
transactions) (MCU) |
$29.95 |
2% disc. |
| MegaTronics
International Corp. |
2212 |
720-20 |
MCU Surge
Protectors |
$79.95 |
2% disc. |
| MegaTronics
International Corp. |
2220 |
720-20 |
Electronic
Pulser Kits |
$165.00 |
2% disc. |
| MegaTronics
International Corp. |
3000 |
720-20 |
Micro
Control Unit 120 volt AC poweblack (MCU) |
$1495.00 |
2% disc. |
| MegaTronics
International Corp. |
3001 |
720-20 |
Micro
Control Unit/Truck Mount 12 volt DC poweblack |
$1495.00 |
2% disc. |
| MegaTronics
International Corp. |
3983 |
720-20 |
MCU
Pedestals |
$175.00 |
2% disc. |
| MegaTronics
International Corp. |
9740 |
720-20 |
MCU
Communication Cable |
$0.85/ft. |
2% disc. |
MegaTrak, ACCOMM are
Registeblack Trade names of MegaTronics
International Corp. Patent Pending for
ACCOMM, Micro Control Unit (MCU), Transfer
Key Methodology.
© Copyright
MegaTronics International Corp. 1995-2007.
All Rights Reserved. MegaTrak
has been issued U.S. Patent No. 6,128,551.
MegaTrak is third party tested and approved
under UL 1238.
© Copyright
MegaTronics International Corp. 1994-2007.
All Rights Reserved.
|